News
Conditions and methods of storage plate heat exchanger
Source
：http://www.puruipule.cn
Time：2020-03-03 14:06:56
Clicks：
There are two types of plate heat exchangers: frame (removable) and brazed. The plate types are mainly herringbone corrugated plates, horizontal straight corrugated plates and knob-shaped plates.
Conditions and methods of storage plate heat exchanger
There is no ozone-generating equipment in the room, such as electrodes and welding equipment. Ozone will crack the rubber. It is strictly prohibited to use the plate heat exchanger as the negative electrode of welding to prevent the arc from breaking through the plate.
To be stored indoors, the temperature is 15-20C, and the humidity is 70%.
Drain the media from the device.
Do not store organic solvents and acid solutions in the room. Avoid heat and ultraviolet radiation.
The surface of the clamping bolt should be painted with a good anti-rust paint.
For storage for more than 6 months, the clamping size of the plate bundle should be relaxed to 1.1L, and then clamped to L when in use.
The above are the related matters of the plate heat exchanger, I hope to help you
Conditions and methods of storage plate heat exchanger
There is no ozone-generating equipment in the room, such as electrodes and welding equipment. Ozone will crack the rubber. It is strictly prohibited to use the plate heat exchanger as the negative electrode of welding to prevent the arc from breaking through the plate.
To be stored indoors, the temperature is 15-20C, and the humidity is 70%.
Drain the media from the device.
Do not store organic solvents and acid solutions in the room. Avoid heat and ultraviolet radiation.
The surface of the clamping bolt should be painted with a good anti-rust paint.
For storage for more than 6 months, the clamping size of the plate bundle should be relaxed to 1.1L, and then clamped to L when in use.
The above are the related matters of the plate heat exchanger, I hope to help you
Keywords：plate heat exchanger
