Position: Home>News Center>Industry news>The tip of installing the plate heat exchanger

Industry news

The tip of installing the plate heat exchanger

Source :http://www.puruipule.cn Time:2018-05-09 14:52:47 Clicks:

1Heat exchanger should not be deformed, fasteners should not loosen or other mechanical damage.

2When the equipment is hoisted, the sling shall not be hung on the receiver, positioned beam or plate.

3Adequate space should be reserved around the heat exchanger for maintenance.

4The installation of the inlet and outlet of cold and heat media shall be connected in the direction specified in the factory nameplate.

5The pipe connected with the heat exchanger should be flushed to prevent debris such as sand welding slag from entering the heat exchanger and causing blockage.

 

 

 

 

 

 

 

 

 

 

Editor’s Note: This is a guest post from heating information on Wechat

Keywords:plate heat exchanger