News
Causes of leakage of plate heat exchanger
Source
:http://www.puruipule.cn
Time:2019-12-09 11:06:05
Clicks:
a.the tightening size is not in place, the size is uneven (the size deviation shall not be greater than 3 mm) or the clamping bolt is loose;
b.Part of the gasket is separated from the sealing groove, there is dirt on the main sealing surface of the gasket, the gasket is damaged or the gasket is aged;
c. the plate is deformed, and the assembly dislocation causes the running pad;
d. there are cracks in the sealing groove of the plate or the second sealing area.