In order to extend the life of the heat exchanger, the heat exchanger needs to be cleaned. 

When cleaning, you should master the appropriate cleaning method to ensure the corresponding cleaning effect.

Not only that, but also the gasket of the heat exchanger should be replaced during daily use. 

Of course, when making replacements, it is also crucial to fully clarify the corresponding operational procedures and master the corresponding replacement methods. 

There are relatively many types of gaskets for heat exchangers, including natural rubber, EPDM rubber, silicone rubber, and asbestos fiberboard. 

The field of application with plate heat exchangers continues to expand. Different temperature and pressure resistance and corrosion resistance requirements for different media and processes.

For this reason, it is necessary to use different materials for different situations. Of course, the cross-sectional shape of the gasket should be the main shape of the hexagon. 

So what are the main replacement steps when replacing the gasket? It is a problem that many people are more concerned about.

The used gasket should be removed. Of course, during the disassembly process, the relevant precautions should be clarified.

Do not scratch the gasket groove, so it is necessary to take appropriate protective measures during the disassembly process, which is relatively important. 

At the same time, a clean new gasket should be applied to the board and the gasket groove and gasket should be wiped clean with a clean cloth or cotton yarn. 

Of course, the slatted sheets should be flat and should be installed in a cool, ventilated place. Apply the adhesive to the gasket groove and apply it evenly. 

In the process of using the heat exchanger, leakage, breakage, aging, etc. usually occur, and should be replaced in time. In short, in the daily use process, 

the heat exchanger should be repaired in time, and it is found that there is a gasket failure, which should be replaced in time.